Foretract have recently completed a project to thermal spray a hard coating onto a wearing surface of a 7m long roller. This was carried out with a spray nozzle mounted on a purpose built hydraulically powered feed rail. A consistent spray pattern along the length of the roller was achieved by controlling longitudinal spray feed relative […]

  The new workshop building is nearing completion with only the internal final fit out and cladding to the front elevation to complete.  

Its going to be a big jump after working out of 2 shipping containers and having power from a diesel generator!

New equipment developed by Foretract Engineering enables transport costs to vessels worldwide to be drastically reduced. The entire kit is transported as hold baggage traveling with the technician on commercial flights. It is contained in 3 tool boxes with a total weight of 70KG. This equipment is designed to remove broken cylinder head studs from […]

The foundations have now been laid for Foretract’s new 260 square meter workshop at North Lakes Business Park. We expect to be moving in during the summer. This new workshop will give us much needed space for equipment preparation, storage and manufacture.

New equipment now based in Singapore has been used for the first time. It was used to remove a broken stud from a 600mm bore 2 stroke engine on a bulk carrier. Previous attempts to remove the stud had been unsuccessful including one where the unit had been stripped to gain access. The job was completed […]

A Foretract technician attended a tanker at Singapore anchorage to remove a broken cylinder head stud from the exhaust side of the 600mm bore 2 stroke engine. Direct access to the stud hole was not possible due to pipe work, cable trays etc. Normally this job would require the removal of cylinder head, piston and liner to […]